+91 89202 02718 sales@tradepurcompany.com

Personal protective equipment (PPE)

Head, hand, eye, ear, respiratory, fall and hi-vis protection from Indian and global makers, matched to the IS, EN and ANSI standards your site or customer audit asks for. Send the model or part number, or the specification, and we'll quote what's available with origin and lead time stated.

Brands on this page: Karam, Udyogi, 3M, MSA, Ansell, Midas Safety, Honeywell, Venus Safety, ReflectoSafe.

Safety helmets

4 brands we source for Safety helmets, with their current series and an example model number.

BrandCurrent seriesOlder series → replacementExample model / part no.
Karam
PN521 ratchet helmetPN541 vented helmetPN581 ratchet helmet
–PN521
Udyogi
UI 1211Ultra series
–UI 1211
3M (SecureFit)
SecureFit X5000SecureFit X5500
–X5002VE-CE
MSA (V-Gard)
V-Gard 500V-Gard H1
––

When ordering, tell us

  • Standard required: IS 2925 (ISI mark), EN 397, EN 50365 electrical insulation or ANSI Z89.1
  • Suspension: ratchet (knob) or slider/nape adjustment; 4-point or 6-point cradle
  • Vented or non-vented shell (choose non-vented for electrical work)
  • Shell material: HDPE, polypropylene co-polymer or ABS
  • Peak style: with peak or peakless (for work at height / climbing helmets)
  • Chin strap and accessory slots for ear muffs or face shield
  • Colour code used on site (e.g. white, yellow, blue, red, green) and quantity

Relevant standards

  • IS 2925 - Industrial safety helmets (ISI mark)
  • EN 397 - Industrial safety helmets
  • EN 50365 - Electrically insulating helmets for use on low-voltage installations
  • EN 12492 - Mountaineering (climbing-style) helmets
  • ANSI/ISEA Z89.1 - Industrial head protection (Type I/II, Class E/G/C)

Work gloves

4 brands we source for Work gloves, with their current series and an example model number.

BrandCurrent seriesOlder series → replacementExample model / part no.
Ansell
HyFlex 11-840HyFlex 11-800ActivArmr 43-216
–11-840
Karam
HS51 cut-resistant glove
–HS51
Udyogi
U-Grip
––
Midas Safety
TechtionNinja
––

When ordering, tell us

  • Hazard: general handling, cut, heat/welding, chemical, oil grip or electrical
  • EN 388 code needed (e.g. minimum cut level B/C/D by ISO 13997, abrasion 3-4)
  • Liner: nylon, polyester, HPPE, aramid, cotton or leather; gauge (13 or 15 gauge)
  • Coating: nitrile, foam nitrile, PU, latex or uncoated; palm-coated or fully coated
  • Extra ratings if needed: EN 407 heat, EN ISO 374-1 chemical, IEC 60903 electrical class
  • Size (6-11) and cuff type (knit wrist, safety cuff, gauntlet length in mm)
  • Quantity in pairs

Relevant standards

  • EN 388:2016+A1:2018 - Mechanical risks (abrasion, cut, tear, puncture, ISO 13997 cut A-F, impact P)
  • EN 407 - Thermal risks (heat and fire)
  • EN ISO 374-1 - Chemical protection (Type A/B/C)
  • EN 12477 - Welders' gloves
  • IEC 60903 - Electrical insulating gloves (Class 00 to 4)
  • ANSI/ISEA 105 - Hand protection classification (cut levels A1-A9)

Eye and face protection

2 brands we source for Eye and face protection, with their current series and an example model number.

BrandCurrent seriesOlder series → replacementExample model / part no.
3M
2890 series gogglesVirtua AP spectacles
–2890
Karam
ES001 spectaclesES008 / ES009 chemical gogglesES51 face shieldFrontier FT series
–ES001

When ordering, tell us

  • Type: spectacles, indirect-vent goggles, sealed goggles or face shield (helmet-mounted or headgear)
  • Lens material: polycarbonate (impact) or acetate (chemical splash, better anti-fog)
  • Lens tint: clear, grey/smoke (sun glare), or welding shade number
  • Coating: anti-scratch (K) and anti-fog (N) as marked on EN 166 frames
  • Hazard marking required: impact B/F, liquid droplets 3, dust 4, gas/fine dust 5
  • Fit over prescription glasses if needed; compatibility with helmet and respirator
  • Standard: IS 8521 (Part 1), EN 166 or ANSI Z87.1

Relevant standards

  • IS 8521 (Part 1):2022 - Eye and face protection for occupational use, general requirements
  • IS 5983 - Eye protectors
  • EN 166 - Personal eye protection, specifications
  • EN 170 - Ultraviolet filters; EN 172 - Sun-glare filters for industrial use
  • ANSI/ISEA Z87.1 - Occupational and educational eye and face protection

Hearing protection

3 brands we source for Hearing protection, with their current series and an example model number.

BrandCurrent seriesOlder series → replacementExample model / part no.
3M
1100 / 1110 foam ear plugsPELTOR Optime II ear muffsPELTOR Optime I ear muffs
–1100
Honeywell (Howard Leight)
Laser Lite
–LL-1
Karam
EP01 foam ear plugsEP21 Classic ear muffEP22 / EP23 / EP24 ear muffs
–EP01

When ordering, tell us

  • Type: disposable foam plugs, reusable plugs, headband / neckband / foldable ear muffs or helmet-mounted muffs
  • Attenuation needed: SNR (EN 352) or NRR (US) in dB, based on measured noise level
  • Corded or uncorded plugs; bulk box or dispenser refill
  • Helmet compatibility and slot type for helmet-mounted muffs
  • Metal-detectable plugs for food or pharma lines if required
  • Standard: EN 352-1/-2/-3 or IS 9167

Relevant standards

  • EN 352-1 - Ear muffs; EN 352-2 - Ear plugs; EN 352-3 - Helmet-mounted ear muffs
  • IS 9167 - Ear protectors
  • SNR (Single Number Rating, ISO 4869) and NRR (Noise Reduction Rating, US EPA) attenuation values

Respirators and masks

2 brands we source for Respirators and masks, with their current series and an example model number.

BrandCurrent seriesOlder series → replacementExample model / part no.
3M
8210 N959004 / 9504 India range6000 series half mask7500 series half mask6000 cartridges and 2000 filters
–6200
Venus Safety
V-44+ / V-44++V-4400V-410 series
–V-4400

When ordering, tell us

  • Hazard: dust/mist particles only, or gases/vapours (organic vapour, acid gas, ammonia) or both
  • Disposable class: FFP1, FFP2, FFP3 (IS 9473 / EN 149) or N95 (NIOSH)
  • With or without exhalation valve; cup, fold-flat or vertical-fold style
  • Reusable: half mask or full-face mask, and size (S, M, L)
  • Cartridge/filter type and code (e.g. organic vapour A1/6001, P2/P3 or P100 particulate)
  • Fit testing and compatibility with goggles and helmet
  • Quantity (boxes of 10/20/50) and shelf life

Relevant standards

  • IS 9473 - Filtering half masks to protect against particles (FFP1/FFP2/FFP3)
  • EN 149 - Filtering half masks: FFP1 >= 80%, FFP2 >= 94%, FFP3 >= 99% filtration; NR/R and D markings
  • EN 140 - Half masks and quarter masks; EN 136 - Full-face masks
  • EN 14387 - Gas and combined filters (A organic, B inorganic, E acid, K ammonia; class 1-3)
  • EN 143 - Particle filters P1/P2/P3
  • NIOSH 42 CFR Part 84 - N95/N99/N100, R and P series approvals

Fall protection

3 brands we source for Fall protection, with their current series and an example model number.

BrandCurrent seriesOlder series → replacementExample model / part no.
Karam
PN23 full body harnessPN56 tower and rescue harnessPN351 forked lanyardClass-rated harnesses
–PN23
3M (DBI-SALA)
ExoFit NEX
––
Honeywell (Miller)
H Design BodyfitTitan II
––

When ordering, tell us

  • Harness type: fall arrest, work positioning, tower climbing, rescue or confined-space
  • Attachment points: dorsal D-ring, front/sternal, side D-rings (count)
  • Lanyard: single or double (forked), length (1.5, 1.8, 2.0 m), rope or webbing, with energy absorber
  • Connectors: scaffold hook opening, karabiner type (steel/aluminium)
  • Anchorage or lifeline: fixed anchor, retractable block, horizontal or vertical lifeline
  • User weight including tools (e.g. up to 140 kg)
  • Safety net: net class (A1/A2/B1/B2), mesh 60 or 100 mm, size and system (S/T/U/V)
  • Standard: IS 3521, EN 361, EN 355, EN 1263-1 or IS 11057

Relevant standards

  • IS 3521 (Part 1):2021 - Full body harness
  • IS 3521 (Part 2):2021 - Lanyards and energy absorbers
  • EN 361 - Full body harnesses; EN 358 - Work positioning belts
  • EN 355 - Energy absorbers; EN 354 - Lanyards; EN 362 - Connectors
  • EN 360 - Retractable type fall arresters; EN 795 - Anchor devices
  • EN 1263-1 - Safety nets (classes A1, A2, B1, B2; systems S, T, U, V)
  • IS 11057 - Industrial safety nets

Hi-vis clothing

3 brands we source for Hi-vis clothing, with their current series and an example model number.

BrandCurrent seriesOlder series → replacementExample model / part no.
Karam (ReflectoSafe)
ReflectoSafe hi-vis workwear
––
ReflectoSafe
ISI-marked hi-vis jackets
––
3M (Scotchlite)
Scotchlite 8906 silver fabricScotchlite 8912 silver fabric
–8906

When ordering, tell us

  • Visibility class: Class 1, 2 or 3 (EN ISO 20471 / IS 15809)
  • Garment: vest, full-sleeve jacket, T-shirt or coverall
  • Background colour: fluorescent yellow-green, orange or red
  • Retro-reflective tape: width (25 or 50 mm), layout (e.g. 2 vertical + 2 horizontal bands), silver or segmented
  • Fabric: mesh or solid polyester; wash durability
  • Printing of company logo; sizes and quantity

Relevant standards

  • IS 15809:2017 - High visibility warning clothes (ISI mark), Class 1 to 3
  • EN ISO 20471 - High visibility clothing; minimum areas Class 3: 0.80 m2 background / 0.20 m2 reflective, Class 2: 0.50 / 0.13, Class 1: 0.14 / 0.10
  • ANSI/ISEA 107 - High-visibility safety apparel (US)

How to order

01

Send the model or part no.

Type it from the label or nameplate, or send a clear photo on WhatsApp. Add the quantity and delivery location.

02

We check availability

We confirm the exact model, origin and lead time. If a model is discontinued, we tell you the maker's replacement.

03

You get a GST quote

One written quote with price, lead time and warranty terms, so you can decide before ordering.

04

Delivered to your site

Delivered across Delhi NCR, or dispatched to you, with a GST invoice.

About the brands on this page. Tradepur Company is an independent trading company, not an authorised distributor of the brands listed. Brand and product names are trademarks of their owners and are used only to identify the products we can source. Origin, condition, warranty terms and lead time are stated on every quote. Series notes are a guide; the exact specification is confirmed on the quote.

Frequently asked questions

Usually, yes. This page lists the brands buyers ask for most, not everything we can source. Send the brand and model number and we'll check.

Yes. We look for remaining stock of the original item and also quote the maker's replacement where there is one, so you can compare.

The model or part number from the label, or the specification listed under 'When ordering, tell us', plus the quantity and delivery location.

More in Industrial & Safety

Get a quote

Reach us directly by phone or email, or leave your details and we'll call you back the same business day — for a product order or a service job, either way.

Get a Callback

Tell us what you need — our team will call you back the same business day, no obligation.

We'll only use your details to respond to this enquiry.